Light-emitting diode

 

A light-emitting diode (LED) is a semiconductor device that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. The color of the light (corresponding to the energy of the photons) is determined by the energy required for electrons to cross the band gap of the semiconductor.White light is obtained by using multiple semiconductors or a layer of light-emitting phosphor on the semiconductor device.

Appearing as practical electronic components in 1962, the earliest LEDs emitted low-intensity infrared (IR) light. Infrared LEDs are used in remote-control circuits, such as those used with a wide variety of consumer electronics. The first visible-light LEDs were of low intensity and limited to red.

Early LEDs were often used as indicator lamps, replacing small incandescent bulbs, and in seven-segment displays. Later developments produced LEDs available in visible, ultraviolet (UV), and infrared wavelengths, with high, low, or intermediate light output, for instance white LEDs suitable for room and outdoor area lighting. LEDs have also given rise to new types of displays and sensors, while their high switching rates are useful in advanced communications technology with applications as diverse as aviation lighting, fairy lights, automotive headlamps, advertising, general lighting, traffic signals, camera flashes, lighted wallpaper, horticultural grow lights, and medical devices.

LEDs have many advantages over incandescent light sources, including lower power consumption, longer lifetime, improved physical robustness, smaller size, and faster switching. In exchange for these generally favorable attributes, disadvantages of LEDs include electrical limitations to low voltage and generally to DC (not AC) power, inability to provide steady illumination from a pulsing DC or an AC electrical supply source, and lesser maximum operating temperature and storage temperature.

In contrast to LEDs, incandescent lamps can be made to intrinsically run at virtually any supply voltage, can utilize either AC or DC current interchangeably, and will provide steady illumination when powered by AC or pulsing DC even at a frequency as low as 50 Hz. LEDs usually need electronic support components to function, while an incandescent bulb can and usually does operate directly from an unregulated DC or AC power source.

As a transducer of electricity into light, LEDs operate in reverse of photodiodes.

Solar cell

 

A solar cell, or photovoltaic cell, is an electronic device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical phenomenon. It is a form of photoelectric cell, defined as a device whose electrical characteristics, such as current, voltage, or resistance, vary when exposed to light. Individual solar cell devices are often the electrical building blocks of photovoltaic modules, known colloquially as solar panels. The common single-junction silicon solar cell can produce a maximum open-circuit voltage of approximately 0.5 to 0.6 volts.

Solar cells are described as photovoltaic, regardless of whether the source is sunlight or artificial light. In addition to producing energy, they can be used as a photodetector (for example infrared detectors), detecting light or other electromagnetic radiation near the visible range, or measuring light intensity.

The operation of a photovoltaic (PV) cell requires three basic attributes: The absorption of light, generating excitons (bound electron-hole pairs), unbound electron-hole pairs (via excitons), or plasmons.
The separation of charge carriers of opposite types.
The separate extraction of those carriers to an external circuit.

In contrast, a solar thermal collector supplies heat by absorbing sunlight, for the purpose of either direct heating or indirect electrical power generation from heat. A "photoelectrolytic cell" (photoelectrochemical cell), on the other hand, refers either to a type of photovoltaic cell (like that developed by Edmond Becquerel and modern dye-sensitized solar cells), or to a device that splits water directly into hydrogen and oxygen using only solar illumination.

Photovoltaic cells and solar collectors are the two means of producing solar power. 

 

 

 

 

Image: Solar cell symbol

Renogy Flexible Solar Panel 50 Watt 12 Volt Monocrystalline

 

• Extremely Flexible] This flexible panel is capable of meeting a wide range of applications where standard panels can be inconvenient to mount, such as on the curved roof of an airstream
• [Ultra Lightweigh] Thanks to advanced polymer materials, this product weighs 70% less than conventional solar panels, making transportation and installation a breeze
• [Super Thin Lamination] Hardly noticeable, the Renogy 50W Lightweight Panel laid flat is only a tenth of an inch tall. Approximately 95% thinner than its rigid counterpart, this panel is ideal for a stealthy solar setup
• [Highly Durable] Rigorously tested, the 50W panel Was designed to withstand extreme wind of up to 2400 PA and snow loads of up to 5400 Pa
• [Potential Uses] The Renogy 50 Watt Flexible Monocrystalline Panel can be primarily used on off-grid applications that include marine, rooftop, RV, boats and any curvy surfaces 

 

 Traditional solar panels are rigid and often enclosed in tempered glass. The Renogy 50W Flexible Solar Panel is anything but traditional. Perfect for marine use or placement on top of a van or vehicle, the Renogy 50W Lightweight Solar Panel is thin and capable of flexing up to 248 degrees. At 2.87 pounds, this flexible solar panel weighs only a quarter of its traditional 50W counterpart. Highly flexible, this lightweight panel can easily be installed on curved surfaces. This panel can also be used for other various applications, including providing power on a boat or teardrop trailer. 

Link to Buy : Amazon 

An Electrical Ballast

 

An electrical ballast is a device placed in series with a load to limit the amount of current in an electrical circuit.

A familiar and widely used example is the inductive ballast used in fluorescent lamps to limit the current through the tube, which would otherwise rise to a destructive level due to the negative differential resistance of the tube's voltage-current characteristic.

Ballasts vary greatly in complexity. They may be as simple as a resistor, inductor, or capacitor (or a combination of these) wired in series with the lamp; or as complex as the electronic ballasts used in compact fluorescent lamps (CFLs). 

 

 Current Limiting : 

An electrical ballast is a device that limits the current through an electrical load. These are most often used when a load (such as an arc discharge) has its terminal voltage decline when current through the load increases. If such a device were connected to a constant-voltage power supply, it would draw an increasing amount of current until it is destroyed or causes the power supply to fail. To prevent this, a ballast provides a positive resistance or reactance that limits the current. The ballast provides for the proper operation of the negative-resistance device by limiting current.

Ballasts can also be used simply to limit the current in an ordinary, positive-resistance circuit. Prior to the advent of solid-state ignition, automobile ignition systems commonly included a ballast resistor to regulate the voltage applied to the ignition system.

ECO-WORTHY 4 String PV Combiner Box

 

ECO-WORTHY 4 String PV Combiner Box 10A Circuit Breaker with Plastic ABS Cover Electrical Box - Waterproof Safe Protection Photovaltaic Generator for Solar Power System Solar Panel Kit Home 

 

Seller : Amazon Uk 

 

 

 

 

 

 

 

 

 

Manufacturer	‎ECO-WORTHY
Part Number	‎L03040401
Package Dimensions	‎31.1 x 24.5 x 17.3 cm; 2.05 Kilograms
Manufacturer reference	‎L03040401
type	‎4 String Combiner Box
Plug profile	‎Panel Mount
Batteries included?	‎No
Batteries Required?	‎No
Item Weight	‎2.05 kg

LED Bulbs E27 Screw 220V-240V 12W

 

Specification:

Base type:E27 LED Lamp Light Bulb

Voltage:AC 220V (200V-240V)

Color temperature:6000-6500K(cold white)

High-Grade Series: 12W Brightness: 100LM/W

Packing

1pcs/lot

 

Average Life : 15000 hours 

Beam  Angle : 270

EU Energy Efficiency Label : A+++

	Seller : Amazon UK